Benicia Fabrication & Machine, Inc. | 101 East Channel Rd. | Benicia, CA 94510 | 707.745.8111 phone | 707.745.8102 fax

Request A Quote For Heat Exchangers

If you would like to request a quote for heat exchangers, please submit the form below, filling in as much information as you have available. Fluid properties for common fluids not required. For general inquiries, click here.

* Indicates Required Field

User Information
*Name:
*Company Name:
*Email:
*Phone:
   (e.g. 9251234567)
Address:

Project Information
Plant Location:
Service of Unit:
Item Number:
Size: ID     OD  (select type)
TEMA Type:
Position: Horizontal     Vertical
Connection In (enter quantity for each): Parallel      Series
Surf/Unit (Effective):
Shells/Unit:
Surface/Shell (Effective):
Number of Units:

Performance of One Unit
Fluid Allocation: Shellside: Tubeside:
Fluid Name:
Total Fluid Entering (lb/hr):
   - Vapor:
   - Liquid:
   - Steam:
   - Noncondensable:
Fluid Vaporized or Condensed:
Liquid Density (In/Out) (lb/ft3):
Liquid Viscosity (In/Out) (cP):
(A third value is helpful)
Liquid Specific Heat (In/Out) (Btu/lb-F):
Liquid Thermal Conductivity (In/Out) (Btu/hr-ft-F):
Vapor Mol. Weight (In/Out):
Vapor Viscosity (In/Out) (cP):
(A third value is helpful)
Vapor Specific Heat (In/Out) (Btu/lb-F):
Vapor Thermal Conductivity (In/Out) (Btu/hr-ft-F):
Temperature (In/Out) (° F):
Operating Pressure (psi(Abs)):
Velocity (ft/sec):
Pressure Drop (Allow/Calc) (psi):
Fouling Resistance (hr-ft2-F/Btu):
Heat Exchange (Btu/hr):
Mean Temperature Difference (corr) (° F)
  Service: Clean:
Transfer Rate (Btu/hr-ft2-F):

Boiling/Condensing Information (Provide heat release curve if applicable)
  Shellside: Tubeside:
Dew/Bubble Point:
Compressibility:
Latent Heat:
Critical Pressure:

Construction of One Shell
  Shellside: Tubeside:
Design/Test Pres. (psi):
Design Temp. (° F):
No. Passes per Shell:
Corrosion Allow. (in):
Connections Size & Rating    
   - In:
   - Out:
   - Intermediate:

Tube Information
Tube No:    OD (in):    Thk/Gage:    Length (ft):
Pitch:    
Tube Type: Plain     Low-fin

Materials
Tube Material:
Shell:
Shell Cover:
Shell Integral Cover: Yes     No
Channel or Bonnet:
Channel Cover:
Tubesheet-Stationary:
Tubesheet-Floating:
Floating Head Cover:
Impingement Protection: Yes     No
Baffles  
   - Baffles Cross:
   - Type:
   - %Cut (Area):
   - Spacing:
   - Baffles-Longitudinal:
        - Seal Type (Longitudinal):
Support  
   - Tube:
   - U-Bend:     - Type:  
Bypass Seal Arrangement:
Tube-Tubesheet Joint:
Expansion Joint:
   - Type:
Gasket  
   - Shellside:
   - Tubeside:
   - Floating Head:
Code Requirement  
   - ASME Code:
TEMA Class:

Remarks